|
| NI CompactRIO Adds Controller Area Network (CAN) Communication for
In-Vehicle Data Acquisition and Control | | | |
National Instruments today introduced the new
Controller Area Network (CAN) interface module for its flexible, high-performance NI CompactRIO platform. The NI
9853 module for National Instruments CompactRIO is a two-port, high-speed CAN interface that combines with NI
reconfigurable I/O (RIO) technology to deliver the highest-performance in-vehicle measurement and control platform
on the market. The NI 9853 module plugs into any CompactRIO chassis to offer a wide variety of capabilities for
automotive and industrial applications, including monitoring in-vehicle CAN buses, reading and writing values to CAN
devices such as electronic control units (ECUs) and actuators, and communicating with industrial devices such as
motion drives and motors.
With CompactRIO and the NI 9853 CAN module, engineers can use the National Instruments
LabVIEW graphical development environment to program the field-programmable gate array (FPGA) chip within the
CompactRIO platform to respond to incoming CAN data with decisions at rates up to 40 MHz. Engineers also can take
advantage of the flexibility and performance of CompactRIO to synchronize the NI 9853 CAN module with any CompactRIO
I/O module offering hardware CAN and data acquisition synchronization with up to 25 ns resolution. The NI 9853 CAN
module also delivers 11-bit and 29-bit arbitration ID support for communication on J1939 networks, and engineers can
use NI-CAN driver software to incorporate Vector database files into their applications.
“We used
the new National Instruments CAN module for CompactRIO to monitor and log CAN frames in our heavy-duty truck,” said
Andrew Leslie, systems engineer at PACCAR. “The small size and ruggedness of the CompactRIO platform made it the
ideal solution for an in-vehicle test system that could survive in the harsh environment of our test course.”
CompactRIO is an advanced embedded control and acquisition system powered by NI RIO technology,
which engineers can use to define their own custom measurement hardware circuitry using reconfigurable FPGA chips
found on National Instruments hardware and easy-to-use LabVIEW graphical development tools. Control and acquisition
system vendors widely use FPGA devices because of their performance, reconfigurability, small size and low
engineering development costs. With CompactRIO, engineers can rapidly build embedded control or acquisition systems
that rival the performance and optimization of custom-designed hardware circuitry.
LabVIEW
programmers no longer need specialized hardware design languages such as VHDL to take advantage of user-programmable
FPGAs to create highly optimized reconfigurable control and acquisition systems. Engineers can choose from a variety
of CompactRIO I/O modules, including a 100 kHz simultaneous-sampling analog I/O module, a 24 V industrial digital
I/O module with up to 8 A current drive and a 24-bit dynamic signal analysis (DSA) analog I/O module for noise,
vibration and harshness (NVH) testing. |
Miércoles, 13 Julio, 2005 - 06:05 | |
|
| NI CompactRIO Adds Controller Area Network (CAN) Communication for
In-Vehicle Data Acquisition and Control | Entrar/Crear una cuenta | 0 Comentarios |
|
| Los comentarios son propiedad de sus respectivos autores.
No somos responsables de su contenido.
No se permitirán los comentarios que :
- puedan resultar ofensivos o injuriosos
- incluyan insultos, alusiones sexuales innecesarias y palabras soeces o vulgares
- apoyen la pedofilia, el terrorismo o la xenofobia |
|
| Boletines de correo |
|---|
 |
| Alguien dijo ... |
|---|
La ciencia consiste en sustituir el saber que parecía seguro por una teoría, o sea, por algo problemático.
José Ortega y Gasset (1883-1955).
Filósofo español. |
| Electrónica Fácil en tu móvil |
|---|
 |
|
