|Alguien dijo ...|
|El número es el que rige las formas y las ideas, y la causa de los dioses y los demonios|
Pitágoras(siglo VI A.C.)
| Dataforth Broadens 8B Family of SCMs with 20kHz Bandwidth Modules|
Dataforth Corporation of Tucson, Arizona, has just introduced the latest addition to its
family of SensorLex 8B isolated analog signal conditioners: the 20kHz filter bandwidth 8B50/51 analog voltage input
modules. These modules provide a much wider bandwidth than the recently introduced 1kHz bandwidth 8B40/41 modules
and a significant increase over the 3Hz bandwidth 8B30/31 modules introduced in January 2005.
The 20kHz bandwidth
of the 8B50/51 series is essential for a number of specific applications. These include:
* Vibration analysis, i.e., suspension monitoring in automotive applications
Isolation for non-isolated accelerometer signals used in high speed DSP systems
and low phase delay for high speed control loops
* Monitoring high frequency strain gage
signals from: Structural shock and vibration testing in aerospace, automotive, locomotive, wind turbine, and power
plant industries, Thrust or impact testing generated by explosions in aerospace and defense applications
* Monitoring high frequency sound wave harmonics generated by flow valves, throttles, turbines,
In addition to wide bandwidth, the 8B50/51 modules also provide high
ratings of ±0.10% accuracy and ±0.05% linearity.
Developed in response to customer requests
worldwide for smaller, lower cost isolated signal conditioners, the SensorLex 8B family ensures fully functional
Instrument Class performance in a package only one-fifth the size of competing modular products; with their high
performance, cost-effective pricing, and miniature size, Dataforth's 8B signal conditioners represent a true
Since its introduction, the 8B line has grown to include 17 family
groups with a total of 106 modules that interface to a wide variety of analog signals such as volt, millivolt,
current, temperature (thermocouple and RTD), position, frequency, and strain measuring devices.
Measuring only 1.11 x 1.65 x 0.4 inches (28.1 x 41.9 x 10.2mm), the 8B signal conditioner is 80% smaller than
similar products, making it ideal for embedded or portable applications such as mobile test stands, COTS military
and defense applications, miniaturized security and surveillance systems, and embedded process controls for
semiconductor manufacturing equipment. With the SensorLex 8B, it is now possible to incorporate high-performance
modular I/O on a per-channel basis for any embedded monitoring or measurement and control system; because the 8B
provides an Instrument Class analog output, interfacing to almost any PC/104, compact PCI, VMEbus, PXI, or
proprietary data acquisition system board is very easy.
The 8B50/51 voltage input modules accept
millivolt and voltage level signals. They achieve signal filtering with a five-pole filter that is optimized for
time and frequency response and provides 100dB per decade of normal-mode rejection above 20kHz. One pole of the
filter is on the field side of the isolation barrier for anti-aliasing; the other four are on the system side.
Common-mode rejection is 100dB. These modules feature a special input circuit that provides protection against
accidental connection of power-line voltages up to 240VAC continuous, and clamp circuits on the I/O and power
terminals protect against harmful transients. Isolation, 1500Vrms, suppresses transmission of common-mode spikes or
surges; it is provided by capacitive and transformer coupling. These modules are designed for installation in Class
I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
other 8B modules, the 8B50/51 offers:
* 1500Vrms Transformer Isolation
* ANSI/IEEE C37.90.1 Transient Protection
* Low Drift with Ambient Temperature
* -40°C to +85°C Operating Temperature Range
* 5V Power
* UL and CE Certifications Pending
* Mix and Match Module Types on Backpanel
Housed in a solid, potted thermoplastic plug-in-the-panel package with a
flammability rating of UL-94 V-0, the 8B family of isolated signal conditioners is specifically designed to protect
user equipment, while reducing electrical noise and enabling convenient system expansion and repair. All 8B modules
offer dimensional stability over temperature, chemical resistance, and excellent stability over time; they do not
Operation and storage temperature for the 8B models is -40 C to +85 C;
relative humidity range is zero to 95% noncondensing. All models meet the requirements of EN61000-6-4
(radiated/conducted emissions) and EN61000-6-2 (ESD/RF/EFT immunity). For operation in hazardous environments, North
American Class I, Division 2, and European Group II, Category 3, approvals are pending.
accessories for the 8B line include a selection of backpanels (2, 4, 8, and 16 channels) that provide screw-terminal
inputs and outputs as well as a DB25 header connector that connects 8B outputs to a user's data acquisition system.
The DB25 header can be matched with a 1, 2, or 7 meter cable to connect sensors and transducers to an external 25
screw-terminal interface board. Moreover, a power supply module in the same 8B form-factor is offered to accommodate
input voltages of 12 to 36VDC and provide 5VDC output at 2A to power any combination of 8B signal conditioners. The
8BPWR-2 module plugs into its own socket on the backpanel, which protects the power supply module from transients
and reverse wiring errors.
Coming months will see the introduction of 8B linearized 2-, 3-, and
4-wire RTD input modules, potentiometer input modules, strain gage input modules, 2-wire transmitter interface
modules, and frequency input modules. Custom signal conditioning models also are available to meet unique signal
conditioning needs, and the 8B line will soon be available in a DIN mount configuration.
Miércoles, 06 Julio, 2005 - 04:00