Secciones
Foros Electrónica
Electrónica Fácil en Twitter
siguenos en twitter
Boletines de correo
Boletines
Sitios recomendados
LT6350: Rail-to-Rail Single-Ended to Differential Amplifier Drives High Speed 16- to 18-bit SAR ADCs
 
 
 


Linear Technology introduces the LT6350, a 33MHz, low noise, rail-to-rail input and output ADC driver that settles to 16-bits in just 350ns. It is suitable for driving the latest highest performance SAR ADCs such as the LTC2393-16. The LT6350 incorporates two op amps and matched resistors to create a differential output from a single-ended high impedance input. As a result, a differential gain of 2 is achieved with no external feedback resistors, and higher gain can be obtained by using feedback resistors. Each of the two internal op amps achieve a low 1.9nV/Hz input-referred noise density, resulting in a total output-referred noise of just 8.2nV/Hz. The LT6350 enables high performance ADCs to achieve better than 110dB SNR over a 1MHz bandwidth.

The input op amp is trimmed for constant low differential input-referred voltage offset over the input range to prevent VOS steps from degrading distortion. At 100kHz, the LT6350 can typically achieve -102/-97dBc HD2/HD3.

The LT6350 provides rail-to-rail input and output range. With a single 5V supply, the outputs can swing 0.055V to 4.945V, and by using a negative supply, the outputs can each swing from 0V to 4.945V. The LT6350 operates on 2.7V to 12V total supply. The LT6350 consumes 4.8mA supply current and has a shutdown mode that allows the system to reduce power consumption during periods of inactivity.

Fully specified commercial (0°C to 70°C), industrial (-40°C to 85°C) and extended (-40°C to 125°C) temperature range versions of the LT6350 are available in 8-lead MSOP and 3mm x 3mm DFN packages. Prices start at $2.59 each in quantities of 1,000 pieces. For more information, visit www.linear.com.

Summary of Features: LT6350

  • Rail-to-Rail Input & Outputs
  • Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step
  • 1.9nV/√Hz Input-Referred Op Amp Noise
  • High Impedance Input
  • No External Gain-Resistors Required
  • 2.7V to 12V Supply Operation, 4.8mA Supply Current
  • Low Power Shutdown
  • Low Distortion (HD2/HD3): –102dBc/–97dBc at 100kHz, VOUTDIFF = 4VP-P
  • High DC Linearity: <±1LSB, 16-Bit, 8VP-P
  • 3mm × 3mm 8-Pin DFN & 8-Lead MSOP Packages


Publica esta página en...

Enviar a Facebook  
  


Publicada el 26 de Jan de 2010 - 08:57 PM   

Esta noticia la han leido 957 lectores

powered by phppowered by MySQLPOWERED BY APACHEPOWERED BY CentOS© 2004 F.J.M.Información LegalPrensa
Esta web utiliza cookies, puedes ver nuestra política de cookies, aquí Si continuas navegando estás aceptándola
Política de cookies +