Secciones
Foros Electrónica
Electrónica Fácil en Twitter
siguenos en twitter
Boletines de correo
Boletines
Sitios recomendados
Ethernet-over-SONET/SDH Mappers Reduce Overall Cost for Delivering New Ethernet Services
 
 
 


Maxim Integrated Products (NASDAQ: MXIM) introduces the DS33M30/DS33M31/DS33M33, a family of highly integrated Ethernet-over-SONET/SDH (EoS) mapping devices. These mappers merge new protocols for transporting Ethernet with the protocols of legacy optical networking, allowing service providers to deliver new Ethernet services using the existing optical transport infrastructure. They are the industry's first monolithic SONET/SDH mapping ICs to support the Ethernet-over-PDH (EoPDH) protocol over optical networks. The DS33M31 and DS33M33 both have a 17mm x 17mm footprint, with the DS33M33 including three additional DS3/E3 add/drop interfaces. The DS33M30 lacks the DS3/E3 functionality, but is the industry's smallest EoS mapper at a mere 10mm x 10mm. All three devices require only a minimal number of external components to implement a complete Gigabit Ethernet to OC-3/STM-1 solution, and provide an ideal solution for Ethernet access equipment, multiservice provisioning platforms, microwave radios, and IP DSLAM uplinks.

The DS33M31/DS33M33 perform EoPDH mapping of Ethernet frames from a Gigabit Ethernet interface into a DS3/E3 frame format, then use traditional SONET/SDH mapping techniques to place the DS3/E3 tributaries into an optical OC-3/STM-1. This merger of new and old protocols results in a technology known as Ethernet-over-PDH-over-SONET/SDH (EoPoS). When EoPoS technology is used, the optical transport network can manage a link as if it carried traditional PDH traffic. This results in the reuse of optical network equipment, provisioning systems, monitoring systems, and test equipment.

The DS33M31/DS33M33 support not only EoPoS mapping, but also the more traditional EoS mapping in virtually concatenated high-order containers, as does the DS33M30. The supported frame encapsulations include GFP-F, HDLC, cHDLC, and X.86 (LAPS). These mappers have Ethernet OAM insert/extract capability, QoS priority scheduling, VLAN processing, and CIR policers for the delivery of variable-rate Carrier Ethernet services. They also have a 1000Mbps GMII Ethernet port, an Ethernet MAC, dual protected STS-3/STM-1 SerDes ports with LVDS/LVPECL interfaces, a GFP-F/HDLC/cHDLC/X.86 protocol encapsulator, a SONET/SDH mapper, a DDR SDRAM interface, and a local bus port for host control. The SerDes interfaces can be seamlessly connected to commercially available optical transceivers.

The DS33M30 is available in a 10mm x 10mm, 144-pin CSBGA package and the DS33M31/DS33M33 are available in a 17mm x 17mm, 256-pin CSBGA package, all specified over the -40°C to +85°C extended-industrial temperature range. Prices start at $55.77 for the DS33M30, $65.25 for the DS33M31, and $72.50 for the DS33M33 (5000-up, FOB USA). Design kits and software drivers are available to reduce design time.

Maxim Integrated Products is a publicly traded company that designs, manufactures, and sells high-performance semiconductor products. The Company reported revenue in excess of $2 billion for fiscal 2008. Maxim was founded over 25 years ago with the mission to deliver innovative analog and mixed-signal engineering solutions that add value to its customers' products. To date, it has developed over 5900 products serving the industrial, communications, consumer, and computing markets.


Publica esta página en...

Enviar a Facebook  
  


Publicada el 24 de Mar de 2009 - 01:56 PM   

Esta noticia la han leido 760 lectores

powered by phppowered by MySQLPOWERED BY APACHEPOWERED BY CentOS© 2004 F.J.M.Información LegalPrensa
Esta web utiliza cookies, puedes ver nuestra política de cookies, aquí Si continuas navegando estás aceptándola
Política de cookies +